manualshive.com logo in svg

IEI Technology PCISA-6612, User Manual

Share
Download
IEI Technology PCISA-6612 User Manual Download Page 2

 

 

2

 

 

PCISA -6612 CPU Card

 
REVISION HISTORY 

 

Model Name 

PCISA-6612 CPU Card

 

Revision Number 

Description 

Date of Issue 

1.0 

Initial release 

December 2006 

 

COPYRIGHT NOTICE 

The information in this document is subject to change without prior notice in order to 

improve reliability, design and function and does not represent a commitment on the part 

of the manufacturer. 

In no event is the manufacturer liable for direct, indirect, special, incidental, or 

consequential damages arising out of the use or inability to use the product or 

documentation, even if advised of the possibility of such damages. 

This document contains proprietary information protected by copyright. All rights are 

reserved. No part of this manual may be reproduced by any mechanical, electronic, or 

other means in any form without prior written permission of the manufacturer.

 

 

TRADEMARKS 

Product names mentioned herein are used for identification purposes only and may be 

trademarks and/or registered trademarks of their respective owners.     

Summary of Contents for PCISA-6612





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands