manualshive.com logo in svg

IEI Technology PCISA-6612, User Manual

Share
Download
IEI Technology PCISA-6612 User Manual Download Page 74

 

 

Page 74 

 

IEI® Technology, Corp

.

 

PCISA -6612 CPU Card

 

Handle the PCISA-6612 by its edges. Do not touch the IC chips, leads or 

circuitry unnecessarily. 

 

 

Do not place a PCB on top of an anti-static bag. Only the inside of the bag is 

safe from static discharge. 

4.3.2 Checklist 

When PCISA-6612 is unpacked make sure the package contains the following items. 

 

1 x PCISA-6612 single board computer 

 

1 x Mini jumper pack 

 

1 x ATA66/100 flat cable 

 

2 x SATA cables 

 

1 x SATA power cable 

 

1 x Dual RS-232 cable 

 

1 x KB/MS Y cable 

 

1 x Utility CD 

 

1 x QIG (quick installation guide)

 

If one or more of these items are missing, contact the reseller or vendor PCISA-6612 was 

purchased from and do not proceed any further with the installation. 

4.4 PCISA-6612 CPU Card Installation 

 WARNING! 

Note that the installation instructions described in this manual should be 

carefully followed in order to avoid damage to the PCISA-6612 components 

and injury to the user.

 

 

Summary of Contents for PCISA-6612





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands