IEI Technology PCISA-6612 User Manual Download Page 34

Page: 34 / 220

Page 34

IEI® Technology, Corp

PCISA -6612 CPU Card

2.11 Drive Interfaces

The PCISA-6612 can support the following drive interfaces.

4 x SATA drives

2 x IDE devices

1 x FDD

2.11.1 SATA Drives

The PCISA-6612 supports four, first generation SATA drives with transfer rates of up to

150Mb/s.

2.11.2 IDE HDD Interfaces

The PCISA-6612 system chipset IDE controller supports up to two HDDs with the

following specifications:

100 MB/second IDE Controller in UDMA mode per the ATA-6 specification

2.11.3 Floppy Disk Drive (FDD)

The PCISA-6612 supports a single FDD. The following FDD formats are compatible with

the board.

5.25”: 360KB and 1.2MB

3.5”: 720KB, 1.44MB and 2.88MB

2.12 Serial Ports

The PCISA-6612 CPU card has two on-board serial ports, configured as COM1 and

COM2 box headers. Both ports can be configured as RS-232. The serial ports have the

following specifications.

16C550 UART with 16/32 byte selectable FIFO buffer

115.2Kbps transmission rate

Summary of Contents for PCISA-6612





























































































































































































































Search results

Summary of Contents for PCISA-6612

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-6612, User Manual

Search results

Summary of Contents for PCISA-6612

Reviews:

Brands by name

Popular brands