IEI Technology PAC-400AI-C236, User Manual

Page: 41 / 110

PAC-400AI-C236 Embedded System
Page 31
WARNING:
Take Anti-Static precautions whenever maintenance is being carried
out on the system components. Failure to take anti-static precautions
can cause permanent system damage. For more details on anti-static
precautions, please refer to
Section 2.1 .
4.1 System Maintenance Overview
NOTE:
When doing maintenance operations on the system, please follow the
instructions in this chapter. Failure to follow these instructions may lead
to personal injury and system damage.
To preserve the working integrity of the PAC-400AI-C236 embedded system, the system
must be properly maintained. If embedded system components need replacement, the
proper maintenance procedures must be followed to ensure the system can continue to
operate normally.
4.2 System Troubleshooting
This section provides some simple troubleshooting suggestions.
4.2.1 The System Doesn’t Turn On
If after turning the system on, there is no power (indicated by the power LED on the front
panel not turning on) please do the following:
Step 1: Check that the power cable connector is properly connected to the system rear
panel.
Step 2: Check that the power cable connector is properly plugged into the power source.