IEI Technology NOVA-9102 User Manual Download Page 4

Page: 4 / 266

Page iv

Manual Conventions

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by

text. The text is the warning message. A warning message is shown below:

WARNING:

This is an example of a warning message. Failure to adhere to warning

messages may result in permanent damage to the NOVA-9152 and

NOVA-9102 or personal injury to the user. Please take warning

messages seriously.

CAUTION!

Cautionary messages should also be heeded to help reduce the chance of losing data or

damaging the NOVA-9152 and NOVA-9102. Cautions are easy to recognize. The word

“caution” is written as “

CAUTION

,” both capitalized and bold and is followed. The italicized

text is the cautionary message. A caution message is shown below:

Summary of Contents for NOVA-9102











































































































































































































































































Search results

Summary of Contents for NOVA-9102

Reviews:

Related manuals for NOVA-9102

Brands by name

Popular brands

IEI Technology NOVA-9102, User Manual

Search results

Summary of Contents for NOVA-9102

Reviews:

Related manuals for NOVA-9102

Brands by name

Popular brands