IEI Technology NOVA-9102 User Manual Download Page 143

Page: 143 / 266

NOVA-9152 and NOVA-9102 5.25” Motherboard

Page 121

inserted the DB-9 connectors should be secured to the chassis with retention

screws.

Step 0:

5.7.12 4-COM Port Adapter Board Connection (Optional)

An optional, separately purchased 4-COM port adapter board may be shipped with the

NOVA-9152 and NOVA-9102. To install the 4-COM Port Adapter Board, please follow the

steps below.

Step 1:

Locate the COM connector

. The locations of the COM port connectors are

shown in Chapter 4.

Step 2:

Insert the cable connector.

Align the cable connector with the onboard

connector. Make sure the pin 1on the cable connector is properly aligned with

pin 1 on the board connector. Figure 5-30.

Step 3:

Connect the adapter board to the cable.

The adapter board with the four COM

ports must then be attached to the cable. Make sure the cable connector is

properly aligned with the connector on the adapter board. Make sure the pin 1

on the adapter board connector and the cable connector are aligned. See

Figure 5-30.

Summary of Contents for NOVA-9102











































































































































































































































































Search results

Summary of Contents for NOVA-9102

Reviews:

Brands by name

Popular brands

IEI Technology NOVA-9102, User Manual

Search results

Summary of Contents for NOVA-9102

Reviews:

Brands by name

Popular brands