IEI Technology NOVA-9102 User Manual Download Page 25

Page: 25 / 266

NOVA-9152 and NOVA-9102 5.25” Motherboard

Page 3

CompactFlash® Type I/II (CF Type I/II) cards. Two PCI Express (PCIe) Gigabit Ethernet

(GbE) controllers provide GbE connectivity to an external network. Four RS-232 and two

RS-232/422/485 serial ports make the system ideal for embedded applications with

multiple serial port peripherals attached.

1.1.1 NOVA-9152 and NOVA-9102 Features

Some of the NOVA-9152 and NOVA-9102 features are listed below.

Supports the following Intel® Socket 479 processors

Pentium® M

Celeron® M

Supports two 200-pin 1.0 GB (max.) DDR2 SDRAM SO-DIMM (system max.

2.0 GB)

Supports VGA channels and 18-bit and 24-bit LVDS displays

Two SATA drives with data transfer rates of 1.5 Gb/s supported

Two Ultra ATA 133, Ultra ATA 100, Ultra ATA 66 or Ultra ATA 33 IDE HDDs

supported

Six USB 2.0 devices supported (six on-board and four on the backplane)

Dual PCIe GbE Ethernet connectors

PICMG 1.3 form factor

RoHS compliant

Supports ATX power supplies

1.2 NOVA-9152 and NOVA-9102 Overview

1.2.1 NOVA-9152 and NOVA-9102 Overview Photo

The NOVA-9152 and NOVA-9102 has a wide variety of peripheral interface connectors.

Figure 1-2

is a labeled photo of the peripheral interface connectors on the NOVA-9152

and NOVA-9102.

Summary of Contents for NOVA-9102











































































































































































































































































Search results

Summary of Contents for NOVA-9102

Reviews:

Related manuals for NOVA-9102

Brands by name

Popular brands

IEI Technology NOVA-9102, User Manual

Search results

Summary of Contents for NOVA-9102

Reviews:

Related manuals for NOVA-9102

Brands by name

Popular brands