IEI Technology NOVA-9102 User Manual Download Page 212

Page: 212 / 266

NOVA-9152 and NOVA-9102 5.25” Motherboard

Page 190

7.6 AC`97 Audio Driver (ALC665) Installation

To install the Realtek AC `97 audio driver, please follow the steps below.

7.6.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Set the

Audio Controller

option to

[AC`97]. See

Section

6.7.2

for details.

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

7.6.2 Driver Installation

Step 1:

Insert the CD that came with the package.

Step 2:

Select

AUDIO

from the list in Figure 7-2.

Step 3:

Navigate to

E:\4-AUDIO\ALC655\A3.84\Windows 98Gold, 98se, Me, 2000, XP,

2003(32,64 bits)

. E

represents the system CD drive. A new window appears

showing the folder contents (

Figure 7-25

Summary of Contents for NOVA-9102











































































































































































































































































Search results

Summary of Contents for NOVA-9102

Reviews:

Brands by name

Popular brands

IEI Technology NOVA-9102, User Manual

Search results

Summary of Contents for NOVA-9102

Reviews:

Brands by name

Popular brands