IEI Technology NOVA-9102 User Manual Download Page 133

Page: 133 / 266

NOVA-9152 and NOVA-9102 5.25” Motherboard

Page 111

Figure 5-19: Connect ATX Power Cable to Motherboard

5.7.4 Audio Kit Installation

The Audio Kit that came with the NOVA-9152 and NOVA-9102 connects to the 10-pin

audio connector on the NOVA-9152 and NOVA-9102. The audio kit consists of three

audio jacks. One audio jack, Mic In, connects to a microphone. The remaining two audio

jacks, Line-In and Line-Out, connect to two speakers. To install the audio kit, please refer

to the steps below:

Step 1:

Locate the audio connector

. The location of the 10-pin audio connector is

shown in

Chapter 3

Step 2:

Align pin 1

. Align pin 1 on the on-board connector with pin 1 on the audio kit

connector. Pin 1 on the audio kit connector is indicated with a white dot.

Figure 5-20: Audio Kit Cable Connection

Step 3:

Connect the audio devices

. Connect one speaker to the line-in audio jack, one

speaker to the line-out audio jack and a microphone to the mic-in audio jack.

Step 0:

Summary of Contents for NOVA-9102











































































































































































































































































Search results

Summary of Contents for NOVA-9102

Reviews:

Brands by name

Popular brands

IEI Technology NOVA-9102, User Manual

Search results

Summary of Contents for NOVA-9102

Reviews:

Brands by name

Popular brands