IEI Technology NANO-HM651 User Manual Download Page 101

Page: 101 / 165

NANO-HM651 EPIC SBC

Page 87

Enabled D

EFAULT

The onboard High Definition Audio controller is detected

automatically and enabled

Power Saving Function [Disabled]

Use the

Power Saving Function

option to enable or disable the power saving function.

Disabled D

EFAULT

The power saving function is disabled

Enabled

The power saving function is enabled

Restore on AC Power Loss [Last State]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Summary of Contents for NANO-HM651






































































































































































Search results

Summary of Contents for NANO-HM651

Reviews:

Related manuals for NANO-HM651

Brands by name

Popular brands

IEI Technology NANO-HM651, User Manual

Search results

Summary of Contents for NANO-HM651

Reviews:

Related manuals for NANO-HM651

Brands by name

Popular brands