IEI Technology NANO-HM651 User Manual Download Page 129

Page: 129 / 165

NANO-HM651 EPIC SBC

Page 115

Step 4:

Reboot the system

from the recovery CD. When prompted, press any key to

boot from the recovery CD. It will take a while to launch the recovery tool. Please

be patient!

Figure B-24: Launching the Recovery Tool

Step 5:

When the recovery tool setup menu appears, press <

> then <Enter>.

Figure B-25: Auto Recovery Environment for Windows

Step 6:

The Symantec Ghost window appears and starts configuring the system to build

an auto recovery partition. In this process the partition created for recovery files

Section B.2.2

is hidden and the auto recovery tool is saved in this partition.

Summary of Contents for NANO-HM651






































































































































































Search results

Summary of Contents for NANO-HM651

Reviews:

Related manuals for NANO-HM651

Brands by name

Popular brands

IEI Technology NANO-HM651, User Manual

Search results

Summary of Contents for NANO-HM651

Reviews:

Related manuals for NANO-HM651

Brands by name

Popular brands