IEI Technology IOWA-MARK-533-128MB-R10, User Manual

Page: 208 / 216

Page 192
IOWA-MARK Half-size CPU Card
Create JBOD for Integrated Capacity and press E
NTER
. A flashing ‘J’ appears
on the Drive Menu where the member drives to be included in the JBOD array
can be chosen.
Step 2: Select RAID array drive members . Use the space bar to select members of
the RAID array. The flashing cursor changes to a lower case ‘s’ once any of the
connected disk drives has been selected. Follow the same method to select
another member drive.
Step 3: Confirm . The Create RAID 0 (Y/N) confirm box appears. Press Y .
Step 4: Name the array . Enter a nickname for the created array. Upper and lower case
alphabetic, numeric, space, and underscore characters are all applicable for
naming an array Step 0:
NOTE:
To reduce the chance of losing data, ALi imposes certain limitations on
the RAID configuration options. Parallel-ATA drives connected on the
same IDE channel cannot be selected as the members of a RAID1
array. Avoid mixing Parallel-ATA and Serial-ATA disk drives in a RAID1
array.
F.4.4 Stripe Size
Changing the stripe size effects RAID 0 arrays. Configurable options are:
64K (default)
32K
16K
8K
4K