IEI Technology IOWA-MARK-533-128MB-R10 User Manual Download Page 144

Page: 144 / 216

Page 128

IOWA-MARK Half-size CPU Card

LPT & COM [LPT/COM]

Use the

LPT & COM

option to enable the system to monitor activity on the LPT display

and serial ports and rouse the system from a suspend or doze state when activity on the

LPT display and serial ports is detected.

None

(Default)

The system is not roused from a doze state or

suspend state when activity is detected on the LPT

display and serial ports.

LPT

The system is roused from a doze state or suspend

state when activity is detected on the LPT port.

COM

The system is roused from a doze state or suspend

state when activity is detected on the COM port.

LPT/COM

The system is roused from a doze state or suspend

state when activity is detected on the LPT port or the

COM port.

HDD & FDD [ON]

Use the

HDD & FDD

option to enable the system to monitor activity on the HDD and FDD

and rouse the system from a suspend or doze state when activity on the HDD and FDD is

detected.

Off

The system is not roused from a doze state or

suspend state when activity is detected on the HDD

and FDD.

(Default)

The system is roused from a doze state or suspend

state when activity is detected on the HDD and FDD.

PCI Master [OFF]

Summary of Contents for IOWA-MARK-533-128MB-R10

























































































































































































































Search results

Summary of Contents for IOWA-MARK-533-128MB-R10

Reviews:

IEI Technology IOWA-MARK-533-128MB-R10, User Manual, Page: 144 / 216

Search results

Summary of Contents for IOWA-MARK-533-128MB-R10

Reviews: