IEI Technology IOWA-MARK-533-128MB-R10 Page 209 User Manual Download

Page: 209 / 216

IOWA-MARK Half-size CPU Card

Page 193

Select a small stripe size if the I/Os to the hard drives are small and occur randomly.

Choose a larger stripe size if the I/Os are mostly large and come in sequential orders, e.g.,

A/V playback and editing applications. The default value should be appropriate for most

applications.

F.4.5 Delete RAID Setting & Partition

WARNING:

If a RAID configuration is deleted, all data previously stored on the

member drives of the RAID configuration will also be deleted.

Step 1:

Delete a RAID setting

. Use the arrow keys to highlight

Delete RAID Setting &

Partition

and press

NTER

. A flashing ‘E’ appears at the

Drive Menu

where the

member drives to be removed can be chosen.

Step 2:

Confirm Delete

. The

Data on RAID drives will be erased (Y/N)

confirm box

appears. Press

Step 0:

F.4.6 Delete All RAID Setting & Partition

WARNING:

If a RAID configuration is deleted, all data previously stored on the

member drives of the RAID configuration will also be deleted.

Step 1:

Delete RAID Settings

. Use the arrow keys to highlight

Delete All RAID Setting

& Partition

and press

NTER

Step 2:

Confirm delete

. The

Data on RAID drives will be erased (Y/N)

confirm box

appears. Press

Step 0:

Summary of Contents for IOWA-MARK-533-128MB-R10

























































































































































































































Search results

Summary of Contents for IOWA-MARK-533-128MB-R10

Reviews:

Related manuals for IOWA-MARK-533-128MB-R10

Brands by name

Popular brands

IEI Technology IOWA-MARK-533-128MB-R10, User Manual

Search results

Summary of Contents for IOWA-MARK-533-128MB-R10

Reviews:

Related manuals for IOWA-MARK-533-128MB-R10

Brands by name

Popular brands