manualshive.com logo in svg

IEI Technology IOWA-MARK-533-128MB-R10, User Manual, Page: 196 / 216

Share
Download
IEI Technology IOWA-MARK-533-128MB-R10 User Manual Download Page 196

 

 

Page 180 

IOWA-MARK Half-size CPU Card

 

NOTE: 

The Sound Effect Manager shown above is for the RealTek ALC655 

audio CODEC. Different CODECs may have different sound manager 

appearances. 

The following section describes the different configuration options in the Sound Effect 

Manager. 

E.2.2 Sound Effect Manager Configuration Options 

The 

Sound Effects Manager

 enables configuration of the items listed below. To configure 

these items click the corresponding menu tab in the 

Sound Effects Manager

 in 

Figure 

E-3

 

 

NOTE: 

The 

Karaoke Mode

 is configured in the 

Sound Effect

 menu. To 

access Karaoke configuration settings, click on the 

Sound Effect

 

menu tab. 

 

Sound Effect 

 

Karaoke Mode   

 

Equalizer  

 

Speaker Configuration   

 

Speaker Test   

 

S/PDIF-In 

 

S/PDIF-Out 

 

Connector Sensing 

 

HRTF Demo 

 

Microphone Effect 

Summary of Contents for IOWA-MARK-533-128MB-R10

























































































































































































































Reviews:

No comments