IEI Technology IBM-Q354 User Manual Download Page 64

Page: 64 / 286

IMB-Q354 uATX Motherboard

Page 42

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the IMB-Q354

may result in permanent damage to the IMB-Q354 and severe injury to

the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the IMB-Q354. Dry climates are especially susceptible to ESD. It is therefore

critical that whenever the IMB-Q354, or any other electrical component is handled, the

following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the IMB-Q354, place it on an

antic-static pad. This reduces the possibility of ESD damaging the IMB-Q354.

Only handle the edges of the PCB

: When handling the PCB, hold the PCB

by the edges.

3.2 Unpacking

3.2.1 Unpacking Precautions

When the IMB-Q354 is unpacked, please do the following:

Follow the anti-static precautions outlined in

Section 3.1

Make sure the packing box is facing upwards so the IMB-Q354 does not fall

out of the box.

Make sure all the components shown in

Section 3.3

are present.

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands