IEI Technology IBM-Q354 User Manual Download Page 177

Page: 177 / 286

IMB-Q354 uATX Motherboard

Page 155

Power Off

The system remains turned off

Power On

EFAULT

The system turns on

Last State

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

ASF Support [Enabled]

Use the

ASF Support

BIOS option to control the system’s ability to connect to a remote

management server.

Disabled

The system will not communicate with a remote

management server.

Enabled D

EFAULT

The Alert Standard Format (ASF) controller is activated

and can communicate with a remote management

server.

Resume on KeyBoard/Mouse [Disabled]

The

Resume on KeyBoard/Mouse

BIOS option specifies if the system is roused from a

suspended or standby state when there is activity on the keyboard or mouse.

Disabled D

EFAULT

Neither keyboard activity nor mouse activity can

rouse the system from a suspend stated.

Resume On

Keyboard

Wake event only generated by keyboard activity

Resume On

Mouse

Wake event only generated by mouse activity

Enabled

Wake event generated by keyboard and mouse

activity

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands