IEI Technology IBM-Q354 User Manual Download Page 40

Page: 40 / 286

IMB-Q354 uATX Motherboard

Page 18

2.4.5 Intel® Q35 Graphics and Display Features

NOTE:

The Intel® Q35 Graphics and Display Features can be configured in

the Northbridge BIOS configuration screen. Please refer to

Section

6.7.1

page 152

The Intel® Q35 GMCH integrated graphics device (IGD) has 3D, 2D and video capabilities.

The Unified Memory Architecture (UMA) uses up to 256 MB of Dynamic Video Memory

Technology (DVMT) for graphics memory. External graphics accelerators on the PCIe

graphics (PEG) port are supported but cannot work simultaneously with the IGD.

2.4.6 Intel® Q35 Analog Display Capability

A single external female DB-15 (VGA) connector interfaces an analog display to an analog

CRT port on the Intel® Q35 GMCH. The VGA connector is shown in

Figure 2-6

Figure 2-6: VGA Connector

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Brands by name

Popular brands