IEI Technology IBM-Q354 User Manual Download Page 101

Page: 101 / 286

IMB-Q354 uATX Motherboard

Page 79

5.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the IMB-Q354 is installed. All

installation notices pertaining to the installation of the IMB-Q354 should

be strictly adhered to. Failing to adhere to these precautions may lead

to severe damage of the IMB-Q354 and injury to the person installing

the motherboard.

5.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be carefully

followed in order to prevent damage to the IMB-Q354, IMB-Q354

components and injury to the user.

Before and during the installation please

the following:

Read the user manual:

The user manual provides a complete description of the IMB-Q354

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD):

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the IMB-Q354 on an antistatic pad:

When installing or configuring the motherboard, place it on an antistatic

pad. This helps to prevent potential ESD damage.

Turn all power to the IMB-Q354 off:

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands