IEI Technology IBM-Q354 User Manual Download Page 59

Page: 59 / 286

IMB-Q354 uATX Motherboard

Page 37

Figure 2-18: LAN Connections

The first GbE controller, is an Intel® 82537L PCIe GbE controller and is the interface

between the Intel® ICH9DO Southbridge controller and the LAN1 RJ-45 Ethernet

connector.

The second GbE controller is integrated on the Intel® ICH9DO Southbridge and interfaced

to the LAN2 RJ-45 Ethernet LAN connector through an Intel® 82566DM Gigabit Platform

LAN Connect device. The Intel® 82566DM is connected directly to the GbE controller on

the Intel® ICH9DO Southbridge through the GLCI and LCI, which is shared with the PCIe

x1 port 6.

Both of these Ethernet controllers have been described in detail in earlier sections. For

further details please refer to the relevant sections:

Intel® ICH9DO Ethernet controller (

Section 2.5.4

)

Intel® 82566DM Gigabit Platform LAN Connect device (

Section 2.5.4.1

)

Intel® 82537L PCIe GbE controller (

Section 2.6.4

)

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands