IEI Technology IBM-Q354 User Manual Download Page 43

Page: 43 / 286

IMB-Q354 uATX Motherboard

Page 21

2.5.3 Intel® ICH9DO High Definition Audio Implementation

A RealTek ALC883 High Definition Audio (HDA) codec is interfaced through the Intel®

High Definition Audio serial link to the HDA controller integrated on the Intel® ICH9DO.

The audio connector is shown in

Figure 2-8

Figure 2-8: Audio Connectors

2.5.4 Intel

ICH9DO Ethernet Controller

NOTE:

Gigabit Ethernet (1000 Mbps) is only supported in S0.

The Intel® ICH9DO Southbridge integrated GbE controller is interfaced to an Intel®

82566DM Gigabit LAN connect device through the Gigabit LAN Connect Interface (GLCI)

and LAN Connect Interface (LCI). The GLCI is shared with the PCIe x1 port 6. The Intel®

82566DM connects the Intel® ICH9DO Southbridge integrated GbE controller to an

external RJ-45 Ethernet LAN connector to provide GbE access.

Summary of Contents for IBM-Q354































































































































































































































































































Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands

IEI Technology IBM-Q354, User Manual

Search results

Summary of Contents for IBM-Q354

Reviews:

Related manuals for IBM-Q354

Brands by name

Popular brands