IEI Technology FLEX-BX210 User Manual Download Page 56

Page: 56 / 126

FLEX-BX210

Page 42

4.3.3 Trusted Computing

Use the

Trusted Computing

menu (

BIOS Menu 6

) to configure settings related to the

Trusted Computing Group (TCG) Trusted Platform Module (TPM).

Aptio Setup – American Megatrends International, LLC.

Advanced

Configuration

Security Device Support

[Disable]

NO Security Device Found

Enables or Disables BIOS
support for security
device. O.S. will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.

----------------------



: Select Screen

↑

↓

: Select Item

Enter:  Select
+/-: Change  Opt.
F1:  General Help
F2:  Previous Values
F3:  Optimized Defaults
F4:  Save & Exit
ESC: Exit

BIOS Menu 6: Trusted Computing



Security Device Support [Disable]

Use the

Security Device Support

option to configure support for the TPM.



Disable D

EFAULT

TPM support is disabled.



Enable

TPM support is enabled.

Summary of Contents for FLEX-BX210































































































































Search results

Summary of Contents for FLEX-BX210

Reviews:

Related manuals for FLEX-BX210

Brands by name

Popular brands

IEI Technology FLEX-BX210, User Manual

Search results

Summary of Contents for FLEX-BX210

Reviews:

Related manuals for FLEX-BX210

Brands by name

Popular brands