IEI Technology FLEX-BX210, User Manual

Page: 103 / 126

FLEX-BX210
Page 89
6.3.2 Flash Descriptor Security Override Jumper (J_FLASH1)
Pin Description
Short 1-2 Disabled (default)
Short 2-3 Enabled
Table 6-27: Flash Descriptor Security Override Jumper (J_FLASH1) Settings
To update the ME firmware, please follow the steps below.
Step 1: Before turning on the system power, short pin 2-3 of the Flash Descriptor
Security Override jumper.
Step 2: Update the BIOS and ME firmware, and then turn off the system power.
Step 3: Remove the metal clip on the Flash Descriptor Security Override jumper or
return to its default setting (short pin 1-2).
Step 4: Restart the system. The system will reboot 2 ~ 3 times to complete the ME
firmware update. Step 0:
6.3.3 Panel Voltage Selection Jumper (J_PW1)
Pin Description
Short 1-2 Keep VCC3V Panel Setup
Short 2-3 Keep VCC5V Panel Setup
Table 6-28: Panel Voltage Selection Jumper (J_PW1) Settings