IEI Technology FLEX-BX210, User Manual

Page: 32 / 126

FLEX-BX210
Page 18
Step 6: Close the HDD cover. Turn the lock knob 90° clockwise by hand, and lock it with
the key if necessary. Step 0:
NOTE:
To temporarily close the HDD cover, turn the lock knob 90°
counterclockwise by hand to secure the cover.
3.5 Removing the Top Cover
WARNING:
Before any internal installation procedures are carried out on the
system, make sure the system is turned off and cooled down for 15
minutes. Failing to turn off the system before opening it can cause
permanent damage to the system and serious or fatal injury to the user.
To access the FLEX-BX210 internally the top cover must be removed. To remove the top
cover, please follow the steps below.
Step 1: Remove the six retention screws, two on the rear and two on each side.