IEI Technology DRPC-100, User Manual

Page: 125 / 160

DRPC-100 Embedded System
Page 111
CAUTION:
The auto recovery function can only run on a Microsoft Windows
system with the following OS versions:

Windows 2000

Windows 7

Windows XP

Windows XP Embedded

Windows Vista

Windows Embedded Standard 7
CAUTION:
The setup procedure may include a step to create a factory default
image. It is suggested to configure the system to a factory default
environment before the configuration, including driver and application
installations.
Step 1:
Follow the steps described in Section A.2.1 ~ Section A.2.3 to setup BIOS,
create partitions and install operating system.
Step 2: Install the auto recovery utility into the system by double clicking the
Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility
MUST be installed in the system, otherwise, the system will automatically
restore from the factory default image every ten (10) minutes.
Figure A-22: Auto Recovery Utility
Step 3: Disable the automatically restart function before creating the factory
default image . Go to: My Computer

Properties

Advanced. Click the