IEI Technology DRPC-100, User Manual, Page: 29 / 160

DRPC-100 Embedded System
Page 15
3.1 Installation Precautions
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the DRPC-100, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the DRPC-100 must be
disconnected during the installation process. Failing to disconnect the power
may cause severe injury to the body and/or damage to the system.

Qualified Personnel : The DRPC-100 must be installed and operated only by
trained and qualified personnel. Maintenance, upgrades, or repairs may only
be carried out by qualified personnel who are familiar with the associated
dangers.

Air Circulation : Make sure there is sufficient air circulation when installing the
DRPC-100. The DRPC-100
’s cooling vents must not be obstructed by any
objects. Blocking the vents can cause overheating of the DRPC-100. Leave at
least 5 cm of clearance around the DRPC-100 to prevent overheating.

Grounding : The DRPC-100 should be properly grounded. The voltage feeds
must not be overloaded. Adjust the cabling and provide external overcharge
protection per the electrical values indicated on the label attached to the back
of the DRPC-100.
3.1.1 High Surface Temperature
WARNING:
Some surfaces of the equipment may become hot during operation.
The surface temperature may be up to several tens of degrees hotter
than the ambient temperature. Under these circumstances, the
equipment needs to be protected against accidental contact.
The equipment is intended for installation in a RESTRICTED ACCESS LOCATION.