IEI Technology DRPC-100, User Manual

Page: 62 / 160

DRPC-100 Embedded System
Page 48

Hyper-Threading [Enabled]
Use the Hyper-Threading function to enable or disable the Intel Hyper-Threading
Technology.

Disabled
Disables the Intel Hyper-Threading Technology.

Enabled D
EFAULT
Enables the Intel Hyper-Threading Technology.
5.3.3 IDE Configuration
Use the IDE Configuration menu ( BIOS Menu 5 ) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0
Not Present
SATA Port1 IEI Technology (4.2GB
Configure SATA as [AHCI]
SATA Port 0 Hot Plug [Enabled]
SATA Port 1 Hot Plug [Enabled]
Select a configuration
for SATA Controller.
---------------------

: Select Screen
 
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration

Configure SATA as [AHCI]
Use the Configure SATA as option to configure SATA devices as normal IDE or AHCI
devices.

IDE Configures SATA devices as normal IDE device.

AHCI D
EFAULT
Configures SATA devices as AHCI device.