IEI Technology DRPC-100, User Manual

Page: 97 / 160

DRPC-100 Embedded System
Page 83
7.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. The table below shows a list of the
peripheral interface connectors on the DRPC-100 motherboard. Pinouts of these
connectors can be found in the following sections.
Connector Type Label
Battery connector 2-pin wafer CN1
Burn in CAN-bus firmware connector 8-pin header CN4
Burn in MCU firmware connector 5-pin wafer JP5
CompactFlash® card slot (solder
side)
CF slot CF1
CPU Fan connector 3-pin wafer CPU_FAN1
Indicator connector 6-pin wafer F_PANEL1
OLED/LED signal connector 8-pin header OLED1
PCIe Mini card slot (supports mSATA) PCIe Mini card slot M_PCIE1
SATA 3Gb/s connector SATA connector SATA1
SATA power connector 2-pin wafer SATA_PWR1
SO-DIMM connector SO-DIMM connector DIMM1
SPI Flash connector 6-pin wafer SPI1
Table 7-1: Peripheral Interface Connectors
7.2.1 Battery Connector (CN1)
PIN NO. DESCRIPTION
1 VBATT
2 GND
Table 7-2: Battery Connector (CN1) Pinouts