IEI Technology DRPC-100, User Manual, Page: 129 / 160

DRPC-100 Embedded System
Page 115
Step 12:
Enable the Auto Recovery Function option ( Advanced

iEi Feature

Auto
Recovery Function ).
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
iEi Feature

Auto Recovery Function [Enabled]
Recover from PXE [Disabled]

Select Screen
 
Select Item
Enter Go to SubScreen
F1
General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
Figure A-30: IEI Feature
Step 13: Save changes and restart the system. If the system encounters a Blue Screen of
Death (BSoD) or a hang for around 10 minutes, it will automatically restore from
the factory default image. Step 0:
A.4 Setup Procedure for Linux
The initial setup procedures for a Linux system are mostly the same with the procedure for
Microsoft Windows. Please follow the steps below to setup the recovery tool for Linux OS.
Step 1:
Hardware and BIOS setup . Refer to Section
78 5H785H
A.2.1 .
Step 2: Install Linux operating system . Make sure to install GRUB (v0.97 or earlier)
MBR type and Ext3 partition type. Leave enough space on the hard drive to
create the recover partition later.