manualshive.com logo in svg

IEI Technology DM series, User Manual, Page: 10 / 128

Share
Download
IEI Technology DM series User Manual Download Page 10

 

 

DM Series Monitor

Page X 

Figure 5-14: Insert the Monitor....................................................................................................59

 

Figure 5-15: Panel Mounting Clamp Position ............................................................................59

 

Figure 5-16: DM-65 Panel Opening (Unit: mm) ..........................................................................60

 

Figure 5-17: DM-65 Panel Mounting............................................................................................61

 

Figure 5-18: Secure the Cabinet/Rack Bracket..........................................................................63

 

Figure 5-19: Install into a Cabinet/Rack .....................................................................................64

 

Figure 5-20: Rack Mounting Nuts and Bolts Installation (DM-190) .........................................65

 

Figure 5-21: Rack Mounting Bracket Installation (DM-190)......................................................65

 

Figure 5-22: Rack Mounting (DM-190) ........................................................................................66

 

Figure 5-23: DIN Rail Mounting Bracket .....................................................................................67

 

Figure 5-24: Screw Locations......................................................................................................67

 

Figure 5-25: Mounting the DIN RAIL ...........................................................................................68

 

Figure 5-26: Secure the Assembly to the DIN Rail ....................................................................68

 

Figure 5-27: Wall-mounting Bracket ...........................................................................................69

 

Figure 5-28: Monitor Support Screws.........................................................................................70

 

Figure 5-29: Wall Mounting the Monitor .....................................................................................71

 

Figure 5-30: VESA Mounting Holes ............................................................................................72

 

Figure 5-31: Monitor Stand Mounting.........................................................................................72

 

Figure 5-32: Monitor Arm Mounting............................................................................................73

 

Figure 6-1: OSD Control Buttons for All Models Except DM-65 ..............................................75

 

Figure 6-2: DM-65 OSD Control Buttons ....................................................................................76

 

Figure 6-3: Main Display Features ..............................................................................................78

 

Figure 6-4: Color Options ............................................................................................................79

 

Figure 6-5: OSD Configurations Menu .......................................................................................80

 

Figure 7-1: Setup Icon ..................................................................................................................83

 

Figure 7-2: Welcome Screen .......................................................................................................84

 

Figure 7-3: License Agreement ...................................................................................................84

 

Figure 7-4: Initiate Install .............................................................................................................85

 

Figure 7-5: Installation Starts ......................................................................................................85

 

Figure 7-6: Finish Installation......................................................................................................86

 

Figure 7-7: PenMount Monitor Icon ............................................................................................87

 

Figure 7-8: PenMount Monitor Popup Menu ..............................................................................87

 

Figure 7-9: Configuration Screen................................................................................................87

 

Figure 7-10: Calibration Initiation Screen ..................................................................................88

 

Figure 7-11: Calibration Screen ..................................................................................................88

 

Summary of Contents for DM series

































































































































Reviews:

No comments