IEI Technology AFL2-12A-HM65/PC-EM-R11 User Manual Download Page 52

Page: 52 / 193

AFL2-12A-HM65 Series Panel PC

Page 38

Step 7:

Once the flat bezel panel PC with the attached rack/cabinet bracket has been

properly inserted into the rack or cabinet, secure the front of the rack/cabinet

bracket to the front of the rack or cabinet (

Figure 4-13

4.8.4 Stand Mounting

To mount the AFL2-12A-HM65 using the stand mounting kit, please follow the steps

below.

Step 1:

Locate the screw holes on the rear of the AFL2-12A-HM65. This is where the

bracket will be attached (

Figure 4-14

Figure 4-14: Mounting screw location

Step 2:

Align the bracket with the screw holes.

Step 3:

To secure the bracket to the AFL2-12A-HM65, insert the retention screws into

the screw holes and tighten them.

Summary of Contents for AFL2-12A-HM65/PC-EM-R11


































































































































































































Search results

Summary of Contents for AFL2-12A-HM65/PC-EM-R11

Reviews:

Related manuals for AFL2-12A-HM65/PC-EM-R11

Brands by name

Popular brands

IEI Technology AFL2-12A-HM65/PC-EM-R11, User Manual

Search results

Summary of Contents for AFL2-12A-HM65/PC-EM-R11

Reviews:

Related manuals for AFL2-12A-HM65/PC-EM-R11

Brands by name

Popular brands