manualshive.com logo in svg

IEI Technology AFL2-12A-HM65/PC-EM-R11, User Manual, Page: 29 / 193

Share
Download
IEI Technology AFL2-12A-HM65/PC-EM-R11 User Manual Download Page 29

 

 

AFL2-12A-HM65 Series Panel PC 

Page 15 

 

Figure 2-2: COM Ports   

2.4.2 LAN Connectivity 

The AFL2-12A-HM65 has one RJ-45 LAN connector on the bottom panel. 

 

Figure 2-3: RJ-45 Ethernet Connectors 

The PCIe LAN from the Intel® HM65 chipset of the AFL2-12A-HM65 is interfaced to the 

Realtek RTL8111E PCIe gigabit Ethernet (GbE) controllers. The RTL8111E controller is 

connected directly to the RJ-45 connector on the bottom panel and provides external GbE 

connectivity.  

2.4.3 External USB Connectors 

There are two USB 2.0 connectors and two USB 3.0 connectors on the bottom panel of 

the AFL2-12A-HM65. All USB connectors are interfaced directly to the USB controllers on 

the HM65 southbridge. All USB connectors are fully compliant with USB specification 

Revision 2.0 and USB specification Revision 1.1 and can be interfaced to both USB 1.1 

Summary of Contents for AFL2-12A-HM65/PC-EM-R11


































































































































































































Reviews:

No comments