IEI Technology AFL-15A-N270, User Manual

Page: 55 / 158

AFOLUX AFL-15A-N270 Panel PC
Page 55
Figure 4-15: AFL-15A-N270 Panel Opening (Unit: mm)
Step 3:
Slide the flat panel PC through the hole until the frame is flush against the panel.
Step 4:
Align the panel mounting bracket screw holes with the VESA mounting holes on
the rear of the panel PC.
Step 5:
Secure the two panel mounting brackets to the rear of the panel PC by inserting
the four retention screws into the VESA mounting holes (
Figure 4-16
).
Step 6:
Insert the panel mounting clamps into the pre-formed holes along the two edges
of the panel mounting brackets (
Figure 4-16
). There are a total of 4 panel
mounting clamps for AFL-15A-N270.
Step 7:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel
(
Figure 4-16
).