miniSPIN
Translation of the original instructions | EN
13 - 45
IEF-Werner GmbH | Wendelhofstraße 6 | DE-78120 Furtwangen | www.ief-werner.de
G
en
er
at
ed
b
y:
R
ei
ch
el
t F
ra
nk
|
M
A
N
_E
N
_1416190_
m
in
iS
P
IN
_R
1b
.d
oc
3
Intended Use
The miniSPIN-component is a compact handling unit with highly dynamic properties.
The concept has been adjusted to positioning of small parts with a weight of up to 20 g.
Typical Pick & Place processes can be implemented with a total cycle time of 240 ms.
The miniSPIN-component can be used both as a single station and in combination with linear units.
In conjunction with directly powered linear axes (e.g. the IEF-Werner component "euroLINE"), highly
dynamic handling systems can be implemented,
−
e.g. for processing product ranges
−
.
Standardised lever lengths are available in order to permit optimal use of the miniSPIN-
components.
Figure 3
miniSPIN components "Mono" and "Twin"
Areas of use of the miniSPIN-components include:
■
Review/contacting of parts
■
Quick handling of parts with up to 20 grams dead weight (clocks, glass, electrical parts,
precision mechanics)
■
As Vision System (also overhead)
■
To swivel parts from the horizontal into the vertical position
■
etc.
3.1
Reasonably Foreseeable Misuse
The miniSPIN-components are
not
to be used for certain applications such as the transport of
persons and animals or as a pressing/bending device.
Use of the miniSPIN-components without additional measures is also
not
possible in special fields
of application, such as the chemical or food industry or in explosive atmospheres.
In case of doubt, consult the manufacturer.
