miniSPIN
Translation of the original instructions | EN
7 - 45
IEF-Werner GmbH | Wendelhofstraße 6 | DE-78120 Furtwangen | www.ief-werner.de
G
en
er
at
ed
b
y:
R
ei
ch
el
t F
ra
nk
|
M
A
N
_E
N
_1416190_
m
in
iS
P
IN
_R
1b
.d
oc
1
Declaration of Incorporation
Within the meaning of the directive 2006/42/EC on machinery according to Annex II, 1. B.
Manufacturer:
IEF-Werner GmbH
Wendelhofstraße 6
D-78120 Furtwangen - Germany
Components:
miniSPIN "Mono" (one NC-motor),
Actuator force-controlled
miniSPIN Twin (two NC-motors),
Actuator as NC-rotating axis
Documentation officer:
Frank Reichelt
The manufacturer confirms that the above component corresponds to the following
basic requirements of the machinery directive 2006/42/EC:
Annex I, item:
1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.3.4; 1.5.1; 1.7.3; 1.7.4;
The technical documents were generated according to Annex VII part B and may be
electronically submitted to the national authorities upon justified request.
The following further directives have been applied:
■
EMC directive 2014/30/EC
The following harmonised standards have been applied:
■
EN ISO 12100
■
EN 1037
■
EN 692
■
EN 60204-1
■
EN ISO 13849-1/-2
■
EN ISO 13857
■
EN ISO 13732-1
■
EN 61310-1/-2
■
EN ISO 13850
■
EN 953
■
EN 14070
The following other technical standards and specifications have been applied:
■
VDI 2854
■
DIN 4844-2
■
EN 60947-5/-6
Commissioning of the component is forbidden until it has been determined that the
machine into which the component is to be installed corresponds to the provisions of the
machinery directive 2006/42/EC.
Furtwangen, January 2018
Manfred Bär (manager)
