24
Field Description
□
□
□
System time elapsed
The time elapsed since start of this device in [Day Hour : Minute : Second] format.
This information can be useful in identifying the reliability of system.
□
□
□
Firmware version
Converter firmware is identified by date code. This information will be required in
looking for technical support.
□
□
□
Serial number
Converter is consisted “Type Number (5 digits) and an unique MAC (Media Access
Control) address used by Ethernet in hex format, 8 digits.
□
□
□
Password
(Setup Login)
This field is the administration password for authentication. Factory default is
“
empty
”. However, it is not recommended to leave it empty in field operation. If you
could not login, it means you have to key in the password. If you do not know the
password you can turn off the power and then use any point tip to press “Reset”
button and hold it to turn on the power
.
The password will be reset to the factory
default as
“empty”.
E-P132-X TCP/IP converter uses the same password protection mechanism
commonly used in Windows NT or UNIX. If there are more than
“3 consecutive
failures”
in password check during login, the login function will be disabled for
“15
minutes”
. During this 15 minutes period, if you supply correct password, login will
not proceed. This prevents intruders from finding the password by computer
generated program.
HIMAQ S.R.L - Tel.: (011) 4709-3505 - Mail: [email protected] - WEB: http://www.himaq.com.ar
