21
Press ENTER or select [IP Address] in the [Config] menu, a dialog will be shown
(see Figure 3.4).
Note : Because ETM uses broadcast UDP packets, for the sake of security, it
allows configuration
only when device's setup password is empty
.
(Figure
3.4)
( Figure 3.4 )
Assign an IP Address with the same Subnet Mask of your computer, avoiding any
IP conflict with other network devices.
When you
press [Ok]
button, the IP address will be refreshed in 2~3 seconds.(see
Figure 3.5).
( Figure 3.5 )
HIMAQ S.R.L - Tel.: (011) 4709-3505 - Mail: [email protected] - WEB: http://www.himaq.com.ar
