32
Factory Default Setting
If by chance, you forget the setup password, or have incorrect settings
making the converter inoperable, there are two ways to reset the setting and
the following procedures can be used to reset all settings to factory default:
A:
1. Turn off the power of the converter.
2. Press the reset button of the converter.
3. Turn on the power of the converter and wait for 3 seconds.
4. The password will reset to the factory default.
( empty )
.
B:
1. Log in the web page.
2. Press the reset button of the converter.
3. Select the update button.
4. After Tx & Rx light flashing then unclasp the reset button.
5. The password will reset to the factory default.
( empty )
HIMAQ S.R.L - Tel.: (011) 4709-3505 - Mail: [email protected] - WEB: http://www.himaq.com.ar
