31
Controller Updated
Press “Update” Button After you finish the detailed parameter setting. The
converter will save all parameters into internal non-volatile memory and then
reboot (see Figure 3.8). It takes about 5 seconds to complete the whole
process, and a new login page will be presented (see Figure 3.1).
(Figure 3..8)
You can re-login and check if all parameters have been correctly saved. If
everything is ok, you can close the browser now.
Note : If the domain of the converter is different from that of the computer
running the browser, the login page won’t appear unless the
converter’s “Gateway Address” has been correctly set.
HIMAQ S.R.L - Tel.: (011) 4709-3505 - Mail: [email protected] - WEB: http://www.himaq.com.ar
