p.10
FEATURES
iTDC
Holiday Schedule Set-up
Except for Sunday, 100 holidays (legal holidays and day-off for shift working system)
can be programmed for one holiday code. (As for those selected dates, it is possible to
set up the time schedule so the entrance/exit can be possible only for the permitted
time range.) Each holiday code can be set-up at each time schedule code.
Example: A. Holiday schedule 01 linked to time schedule 01,
Holiday schedule 02 linked to time schedule 02
B. Holiday schedule 02 linked to time schedule 01,
Holiday schedule 01 linked to time schedule 03
Door Open time Setting by ID (Card holder)
This function can set door opening time in terms of each of card holders. This function
can be useful for handicapped people but the function cannot be set with ARM setting
at the same time.
Door Open Alarm and Door Open by Force Alarm
The Door Open Alarm function is to notice the administrator that any case of the door
opened even after the normal opening time and waiting time. (The output port can
activate the output signal. The error status with the time can be saved and transmitted
upon the PC program’s request.) The Door Open by Force Alarm function is to activate
the alarm when the door is opened by force. If the waiting time passed with this
status, the door open time excess status will be activated again.
Applicable Software
Card registration, In/Output operating type, In/Output setting and time schedule etc
can be set by the software. Also monitoring for access status of cardholder and alarm
status are available in real time. IDTECK offers the applicable software STARWATCH
iTDC PRO I/II and STARWATCH STANDARD.
Input Status Check (2 Status ON/OFF)
It checks the status ON(connected)/OFF(disconnected) between controller and input
device then alarm event generates. So instantaneous check and handling are available
by software.
ESD Design (Electro Static Discharge)
The Device is designed to withstand static electricity or surge so the system can be
operated stably.
Summary of Contents for iTDC
