IDTECK iMDC-MAIN, User Manual

Page: 14 / 79

iMDC INSTRUCTION p.8
HOLIDAY SCHEDULE SETTING
Except for Sunday, 128 holidays (public holidays and day-off for shift working system)
can be programmed. Maximum of 64days holidays can be set by one holiday code. M
aximum of 3 time schedule codes can be set by one user ID so total available days to s
et holiday code is 192(64X3=192). (As for those selected dates, it is possible to set up
the time schedule so the entrance/exit can be possible only for the permitted time ran
ge.) Each holiday code can be set-up at each time schedule code.
USER DEFINED POWER FAIL SAFE/POWER FAIL SECURE
When the communication between iMDC-MAIN and iMDC-RIM is interrupted becaus
e of a blaze or disaster etc, iMDC offers two output modes, Power Fail Safe and Powe
r Fail secure.
Because the default setting of iMDC is Power Fail Safe, door opening is continued wh
en the network between iMDC-MAIN and iMDC-RIM is disconnected.
You can set the Power Fail Safe mode and Power Fail Secure mode by using STARTW
ATCH ENTERPRISE in the place where you want to set.
Power Fail Safe mode: The door is opened when the emergency occurs.
Power Fail Secure mode: The door is closed when the emergency occurs.
DOOR OPEN TIMEOUT ALARM, FORCED DOOR OPEN ALARM
The Door Open Timeout Alarm function is to notice the administrator that any case of
the door opening even after the normal opening time and waiting time.
The Door Open by Force Alarm function is to activate the alarm when the door is ope
ned by force. If the waiting time passed with this status, the door open time excess st
atus will be activated again.
DURESS ALARM
Duress Alarm Function is used to notice any case that the door has to be opened by f
orce. In case of duress, enter the 2 digits Duress Password and then press <ENT> key b
efore the normal access process then the door will be opened as normal but the dures
s alarm is also generated at the same time and the duress alarm output will be activat
ed to TTL output and alarm event will be sent to the Host PC.
 EVENT PRIORITY SETTING
All of entrance and exit information is saved as events. The manager can search all of
user’s information about the entrance time and place by event record. Events are save
d and searched in chronological order. If users want to search specific event list not in