IDTECK FINGER006SR, User Manual

Page: 32 / 48

Operation p.27
4. If you’d like to register more user cards, repeat the steps above.
5. If you’d like to finish registration, present the Master Card to return to the Reader Mode.
※ You can use application software to register users.
RF Only:
If you’d like to register a new user without use of fingerprint, follow the steps below.
1. Just present the user card you’d like to register.
2. While red light is illuminated from the fingerprint scanner, don’t place the fingerprint o
n it and wait until the red light turns off automatically.
3. After the registration is successfully completed, you’ll hear 3 beeps.
4. If you’d like to register more user cards, repeat the procedure above. Or, if you’d like to
finish registration, present the Master Card to return to the Reader Mode.
※ NOTE: You can delete user cards by using the application software.
3 Reader Mode
3.1 Reader Mode Function.
In the Reader Mode, when a card is presented, access of registered users is accepted and ac
cess of unregistered users is denied.
●
If a user is authorized, the FGR006 transmits the card number to the controller.