IDTECK FINGER006SR, User Manual

Page: 13 / 48

p.8
(4/8bit Burst for PIN, 34bit Wiegand, ABA Track II)
Communication
RS232 / RS422 / RS485 (Max.255ch)
TCP/IP (External LAN Converter Required)
Baud Rate
9,600bps (Recommended) /
4,800bps, 19,200bps and 38,400bps (Selectable)
Input Port
3 ports (LED Control In,
Buzzer Control In, Tamper Switch)
Output Port
3 ports (Error Signal Out,
OK Signal Out, Tamper Switch Out (Open Collector Out
put))
LED Indicator / Beeper
3 LED Indicators (Red and Green) /
Piezo Buzzer
Operating Temperature Fingerprint Mo
dule
-20 to +60C (-4 to +140F)
RF Reader
-35 to + 65C (-31 to +149F)
Operating Humidity
10% to 90% relative humidity non-condensing
Color / Material
Pearl Dark Gray and Light Gray / Polycarbonate
Weight /
Dimension (W x H x T)
259.5g (0.57lbs) /
66mm x 129mm x 52mm (2.6” x 5.1” x 2.0”)
Certification
FCC, CE, KC
●
Finger Module Specification
Resolution
500dpi
Capture Image Size
356 X 292 pixels
Extraction Image Size
248 X 292 pixels
Sensing Area
12.7 X 14.9mm
Scanner
High Quality Optical Sensor
FAR(False Acceptance Ratio)
0.001%
FRR(False Reject Ratio)
0.1%
ESD(Electro Static Discharge)
15KV
Verification Time
Less than 1sec.
Identification
Less than 2sec.