IDS X64, Installer Manual

Page: 13 / 24

Section: 2
IDS X64 Remote Receiver 700-408-02A Issued August 2010
13
10. The ARM and AWAY LEDs flash simultaneously, and the READY and POWER LEDs flash
simultaneously.
11. Once you have finished, press the [#] key to exit programming.
2.8 Set Remote Receiver Button Properties
Use the following steps to set the Remote Receiver button properties.
[*] [Master Code] [*] [2] [3] [*] [Receiver Number] [*] [Button Number] [*] [Property Number]
[*] [#]
LCD Keypad
1. Hold the [*] key until the beep (3-4 seconds).
2. The keypad displays “Master Code + *”.
3. Enter [MASTER CODE] followed by the [*] key.
4. The keypad displays “Option Menu”, “Add User Code”.
5. Enter [2] [3] followed by the [*] key.
6. The keypad displays “Receiver Num + *”.
7. Enter [RECEIVER NUMBER] , which could be 1, 2, 3, or 4, followed by the [*] key.
8. The keypad displays “Rx *”.
9. Enter [BUTTON NUMBER] , which could be 1, 2, 3, or 4, followed by the [*] key.
10. The keypad displays “Remote Receivr N ”, “ B R RS ”,
11. At the keypad you can scroll through the properties with the “ >> ” and “ << ” keys. Use the [*]
key to toggle properties.
12. Repeat steps 9-11 to set more button properties.
13. Once you have finished, press the [#] key to exit programming.
LED Keypad
1. Hold the [*] key until the beep (3-4 seconds).
2. The READY and ARM LEDs flash alternately.
3. Enter [MASTER CODE] followed by the [*] key.
4. The READY LED flashes.
5. Enter [2] [3] followed by the [*] key.
6. The READY and ARM LEDs flash simultaneously.
7. Enter [RECEIVER NUMBER] , which could be 1, 2, 3, or 4, followed by the [*] key.
8. The READY and AWAY LEDs flash simultaneously, and the ARM LED is on.
9. Enter [BUTTON NUMBER] , which could be 1, 2, 3, or 4, followed by the [*] key.
10. The READY LED is on if you are viewing button 1, the ARM LED is on if you are viewing button 2,
the AWAY LED is on if you are viewing button 3, and the POWER LED is on if you are viewing
button 4.