31
IDS 805 Installer Manual 700-266-02H Issued September 2009
reporting code would be C1 indicating a close by user 1.
NOTE:
If the system is armed using the quick arm "AWAY"
key, the system will report a close by user 1.
If the system is armed by means of a key or remote using an arm/disarm zone the system will report a
close by user 13.
LOCATION 109
Open Reporting Code
The open code will be reported when the system is disarmed.
NOTE:
The open code will not be reported if the system was armed in the stay mode and the stay arming
reporting code (location 110) is 0 i.e. disabled.
The digit programmed into this location is the first digit of the reporting code. The second digit will
automatically be added and will be the number which corresponds to the user code used to disarm the
system (See User Manual).
EXAMPLE:
If an open code of B (11) is programmed and the master user code is used to disarm the system, the 2
digit reporting code would be B1 indicating an open by user 1.
NOTE:
If the system is disarmed by means of a key or remote using an arm/disarm zone the system will report
open by user 13.
LOCATION 110
Close & Stay Reporting Code
The stay code will be reported when the system is armed in the stay mode indicated by a lit ARMED but
off AWAY LED on the keypad. The digit programmed into this location is the first digit of the reporting
code. The second digit will automatically be added and will be the number which corresponds to the user
code used to arm the system (See User Manual). See the EXAMPLE and NOTE for location 108.
LOCATIONS 111-112
Auto Test Reporting Code
This code is the test reporting code and will be reported at regular intervals as programmed into location
147. Reporting of this code is recommended as it provides verification that the system is functioning
correctly.
LOCATIONS 113-114
Keypad Fire Reporting Code
This code will be reported if the fire button
[F]
on the keypad is pressed until the keypad beeps
(approximately 1 second).
LOCATIONS 115-116
Keypad Medical Reporting Code
This code will be reported if the medical button
[M]
on the keypad is pressed until the keypad beeps
repeatedly (approximately 1 second).
LOCATION 117
Bypassed Zone Reporting Code
A zone bypass code will be reported if the panel is armed with a bypassed zone. The zone number will
Summary of Contents for 805
