DFS-01UHD / DFS-01HD User’s Guide
38
8.8 Setting audio
The formats mentioned in the table below are supported for HDMI digital audio.
Set the audio depending on device connected to the HDMI output connector.
Only “2 channel LPCM” can be input by default. If you want to use “Multi channel LPCM” or bit stream signal,
set the audio format and speaker configuration.
【
See: 8.9.5 LPCM Audio
【
See: 8.9.4 Speaker configuration
[Table 8.4] Audio format
Audio format
Description
2 channel LPCM
2ch, 32 kHz to 192 kHz, 16 / 20 / 24 bit
Multi channel LPCM
8ch, 32 kHz to 192 kHz, 16 / 20 / 24 bit
Dolby Digital, DTS, Dolby ,
DTS-HD, Dolby TrueHD, AAC
Bit stream
■
If multi channel LPCM signal is input to digital audio:
For sink device that do not support multi-channel LPCM signal, 2 channels (ch) that are set in “
” or down mixed audio will be output.
Digital output
5.1ch
5.1ch
Switch
Output level
Digital input
Blu-ray player
AV Amplifier supporting
multi channels
LCD monitor not supporting
multi channels
Digital output
5.1ch
Switch
Output level
Digital input
Blu-ray player
Any 2 ch or
down mixed audio
[Fig. 8.12] Multi channel LPCM input
■
If bit stream signal is input to digital audio:
Input audio is output to digital audio connector.
Audio volume cannot be adjusted.
Switch
Adjusting audio volume disabled
Digital output
Bitstream signals
Digital input
Blu-ray player
AV Amplifier
[Fig. 8.13] Bit stream signal input
