Part 2 - Configuration
64
Event Setup
Refer to the
for basic
information on using the Setup menus.
System Event
Use this option to configure Monitoring settings.
●
Settings
: Configure when and what the system
should monitor for.
●
Actions
: Configure alarm-out (NVR alarm-out
channel, NVR beep, camera alarm-out channel) and
notification (email, LAN1 through 5, push, HTTP, alert
window) settings.
Monitoring Options
System
Define monitoring times. If self-
diagnosis is not performed on
a regular basis, the system will
assume an error.
Bootup,
Restart,
Shutdown
Define bootup, restart and
shutdown actions.
Panic Record
Define panic recording actions.
Check
Recording
The system will assume an error
if the system has been scheduled
to record normally but recording
does not take place during
scheduled intervals.
Select
Schedule On
and then
configure the days of the week,
times, and monitoring interval.
Select the button on the
bottom left of the screen to add
a schedule. Select icon to
delete the schedule.
Check Alarm-
In
The system will assume an error
if the alarm-in status does not
change during the specified
monitoring interval while alarm-in
is active.
Disk Almost
Full
Generates an event if the disk
reaches the specified capacity
(80% to 99%).
Disk Partially
Almost Full
Generates an event when the disk
of one of two groups reaches the
specified capacity (80% to 99%).
For more information on the disk
group, refer to
.
