Part 2 - Configuration
83
●
Exceed the Time Limit
Condition:
When a specific
event occurs, you can set the condition that
determines whether to operate motion according to
the status of other events
.
–
Reference Only
: Set the event to be the subject of
a reference.
–
Event
:
Set the reference event.
–
Channel
:
Set the reference channel.
●
Actions:
Specify which actions to take when an event
occurs.
–
Record:
Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out:
Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify:
Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ:
Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR must
be registered on the remote program.
•
In order to use the Exceed the Time Limit feature,
Queue Management should be set on the
channel.
VA Box_Exceed Occupancy Limit
Event occurs when the In/Out coefficient is detected and
the coefficient of the relevant VA Box channel is added in
real time to exceed the specified conditions.
●
Set up :
Set the
Exceed Occupancy Limit event.
-
Max People :
An event occurs when a person in
the area in excess of the number of people set by a
person.
To use the limit head count function, the channel
must have a People Counting setting on DV-
2232.
●
Actions:
Specify which actions to take when an event
occurs.
–
Record:
Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out:
Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify:
Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ:
Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
