Part 2 - Configuration
87
device you set at the source..
Alarm-Out_Schedule
Click the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
●
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
●
Title
: Designate a name for the alarm-out.
●
Range
: Change the schedule time frame.
●
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
●
Channels
: Configure alarm-out port and beep
settings.
Remote Control
●
Port
: Select
None
, or
RS232.
Click the
Setup
button
and then select the correct
Baud Rate
,
Parity
,
Data
Bits
and
Stop Bits
for the device you are connecting
to the NVR. You can select the device from the
Remote Control Product
list. If the is in use for
PTZ control, networking or text input, the remote
keyboard cannot be configured. A warning message
window will appear when other devices are using
the same port, such as PTZ control, networking or
text input. The message warns that you cannot use
another device because the ports overlap.
