Part 2 - Configuration
70
Camera System_PIR
This event occurs when the PIR sensor mounted on the
camera is used to sense motion. Since the PIR sensor
detects the temperature of the human, it can detect
motion even in dark places without light.
●
No.:
Select which cameras to apply PIR to.
●
Sensitivity
: Set sensitivity settings between 1 (Low)
and 5 (High).
●
Reference Event
: Set condition for event to occur
using the PIR sensor. A PIR event occurs when a
motion occurs after an event set as a reference event
has occurred. You can set Motion and Trip Zone as
reference events.
●
Actions:
Specify which actions to take when a PIR
event occurs.
–
Record:
Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out:
Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify:
Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ:
Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR must
be registered on the remote program.
•
In case of the camera that not supports face
detection event, the face detection feature will
be disabled.
●
Ignoring Interval:
The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
motion was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignoring interval setting does not affect the motion
detection recording.
●
Use Ignoring Time
: Select
Time Setup
to specify
the PIR detection ignore time. PIR detection will be
disabled during the specified time frame.
Video-Analytics
Event lists that occur through video analysis include
Motion, Tampering,TripZone, Auto Tracking, Loitering,
Line Crossing and Object Detection events.
